40:50-1-4.1. Installation requirements 
     The device shall be installed according to the following guidelines:
(1)    Original device installations shall only be performed in a service center duly licensed by the Board.
(2)    The only person(s) allowed to install or observe the installation of the device are ignition interlock technicians duly licensed by the Board.
(3)    A designated waiting area that is separate from the installation area is to be provided for the participant.
(4)    Adequate security measures shall be taken to ensure that unauthorized personnel cannot gain access to proprietary materials or files of other participants.
(5)    The ignition interlock technician shall perform maintenance and calibration on the device in accordance with this title.
(6)    Upon completion of an installation of a device, the licensed ignition interlock technician shall provide the participant with installation verification in the form and/or format designated by the Board.
(7)    Upon completion of the installation of a device required for compliance with an Installation Authority(s), the licensed ignition interlock technician shall:
(A)    Provide the participant with installation verification in the form and/or format designated by the board, and
(B)    Remit the appropriate fee.
(8)    Outside the inclusion zone, upon completion of the installation of a device required for compliance with an Installation Authority(s), the technician who installs the device shall:
(A)    Apply to the Director for authority to issue installation verification in the form and/or format designated by the Board, and
(B)    Remit the appropriate fee.
[Source: Added at 27 Ok Reg 2667, eff 8-26-10]